Increasing the Profits, Productivity and Safety
Of Concrete Contractors

is what our tools and system are all about.  We have developed the tools and a the FPT System so that you, and/or your crew, can remove wall forms faster, easier and more safely than with conventional tools and methods.  An additional benefit of using our tools is that damage to your forms caused by the stripping process will be greatly reduced.  No more gouging the sides and/or face of your forms with a hammer or pry bar to break them free!  Not only will your forms last longer, but you'll get increased production from your crew and better looking walls!  Our Form Popper and Form Puller line of tools have truly revolutionized the form stripping process!

Free Demonstration!  Go to our "Distributors" page to find a distributor near you who can provide you with a free, no obligation demonstration of our tools.  If there isn't a distributor near you, call or email us with the name and phone number of your form or material supplier and we'll arrange a demonstration for you through them.

                           
               6 months- no damage  /  18 months- ruined                 side view of same forms
     
Here are pictures of two 1-1/8" plywood forms side by side.  The form on the left has been in service for six months and has been stripped from walls using only the Form Puller Tool (FPT) System.  The form on the right has been in use for 18 months and has been stripped using conventional methods (claw hammer, pry bar, etc.).  As you can see, the use of the FPT tools virtually eliminates damage to the face and sides of your forms and can increase the useful life of these forms by 50-100%!  Add that to the fact that the use of the "FPT System" can also decrease the amount of time that it takes to strip a form by up to 75%, and you now have a system for removing your concrete forms that not only increases your production, but also reduces your overhead.  Go to the "FPT System" page for an example of how the "FPT System" is applied to stripping 1-1/8" plywood forms.

         
Form Popper II-L50                                             Form Popper II stripping elevated forms.

     
Form Puller III being used to remove steel frame plywood face forms. 
Watch videos on "Products" page.

"The tools paid for themselves in one day!"      
Bruce Lyon, Owner- Complex Const. Co.  Newtown, CT

Call Form Puller Tool Co., Inc.
  at (800) 203-5772, or order on-line!