         |
The
Form Puller Tool System consists of durable
hand tools and the most effective methods to use them.
While the tools are very effective in helping to remove the forms,
implementation of the "FPT
System" is the thing that will have the biggest impact on
your bottom line. Because of the reach and capability of
the tools on this page, you are able to perform your
stripping operation in a different manner, and it's this change in
methodology that will allow you to reduce your overall stripping
time by up to 50% or more. That's HUGE! Go to the
"FPT
System" page for an
example of how you can increase production
and profits by implementing the "System" while using our
tools.
Form Puller III (U.S. Patent
#6,817,590) (International Patent Pending)
Click here to view
video Form Puller
III
Form Puller III is designed to aid in
the removal of steel frame plywood
face forms. It's used once the first two forms have
been removed from the wall using our Form Popper II or II-L
tool (see below). Simply slide the tip of Form Puller III
into an upper slot in the side of the frame and then
push the handle toward the wall. This
action pulls the top of the form away from the face of the
wall quickly and easily. Then move down to a slot in the
middle of the frame to further free up the form. If
necessary, move down to a slot near the bottom of the form to
complete removal. Using this tool is much
better and easier than using a pry bar and hammer to
remove your forms.
You'll want to consider buying the
two tools below, as well. Read on to find out
why.
Form Popper II & Form Popper
II-L
(U.S. & International Patents Pending)
  
Form Popper II-L being used on
an 8'
starter form. Form Popper
II being used on 6' elevated
form.
Click here to view video
These are slide
hammer type tools that have a rugged head designed to be used
for stripping steel frame plywood face forms and inside
corners. We all know that removing the inside corners and
the first form on inside walls is a challenge for all
contractors who use this type of form. So we've invented the
tools to make the process much faster, easier and
safer. Our Form Popper
II tool removes short forms (whether
they are on the footing or stacked) and corners up to 9'
tall. Our 62" Form Popper
II-L tool allows you to strip 8' high forms while
standing on the footing or sub-grade. Form Popper II-L50 is a 50" long tool that's designed to strip 6' forms
that are set on the footing. We've added the
74" Form Popper II-L74 to our line
for stripping 9' forms.
No more standing on
ladders or climbing on top of walls to remove 6'-9'
forms and inside corners! Once the first two forms are
removed using our Popper tools, you then use our Form
Puller III to remove the rest of the forms on that
wall. When you get to the inside corners, you
simply use your Form Popper I to quickly remove
them. These three tools used as a system make
stripping your forms much easier and faster than the method
you're currently using. And, because you no longer need
to hammer or pry against the face of the forms to remove
them, the life of your forms is significantly increased.
The tools pay for themselves quickly because of the increased
production they provide and because they make your forms last
longer. You may even see a decrease in medical claims
associated with stripping forms! Use of these tools will
immediately increase your production, profits and safety
level.
_____________________________________________________________________
Free Demonstration! Go to our "Distributors" page to find a
distributor near you who can provide you with a free, no obligation
demonstration of our tools. If there isn't a distributor near
you, call or email us with the name and phone number of your form or
material supplier and we'll arrange a demonstration for you
through
them.
____________________________________________________________________
Safety Warning- We recommend that
you wear safety glasses, gloves and a hard hat while using our
tools.
     | |
|
