         |
The
Form
Puller Tool
System consists of durable hand tools and the
most effective methods to
use them. While the tools are very effective in helping
to remove the forms, implementation of the "FPT System" is the thing that will
have the biggest impact on your bottom line. Because of the
reach and capability of the tools on this page, you
are able to perform your stripping operation in a different manner,
and it's this change in methodology that will allow you to reduce
your overall stripping time by up to 50% or more.
Form Popper III
& Form Popper III-L Series
(U.S. &
International patents
pending)
Form Popper
III
62" Form Popper
III-L
These slide hammer type tools are
designed for stripping Symons, Western, Durand and
other brands of compatible aluminum forms. They are best
suited for removing the stubborn first form on an inside
wall. The stud on the head simply goes into a hole
in the frame of the form. The shock created by these
tools "pops" the form free from the wall quickly and easily.
Once the first form is removed using a Popper, strip the rest
of the forms using our Form Puller V shown below.
Form Popper III is used on short forms that are
on the footing or elevated forms that will be stripped by a
crew member who is standing on planking. It can also be used
for pulling ties and inside corners.
We
offer three sizes of Form
Popper III-L, 50" for removing 6' forms, 62" for removing 8'
forms, and 74" for removing 9' forms. Form Popper
III-L tools are designed to
be used for removing forms while standing on the footing
or sub-grade.
Form Puller V (U.S.
Patent #6,817,590) (International Patent
Pending)
Form Puller V
Form Puller V is a leverage bar that's designed
to remove aluminum forms. It's used once the
first form has been removed from the wall using our Form Popper
III or III-L tool. Simply insert the tip
of Form Puller V into an upper hole in the side of
the form and then push the handle toward the
wall. Then move down to a hole in the middle of
the form, and then down to a hole near the bottom of
the form. This action pulls the form away from
the wall and past the ties quickly and easily.
Consider buying several of these tools so you can maximize your
crew's
production.
_____________________________________________________________________
Free Demonstration!
Go to our
"Distributors" page to find a distributor near you who can provide
you with a free, no obligation demonstration of our tools. If
there isn't a distributor near you, call or email us with the name
and phone number of your form or material supplier and we'll
arrange a demonstration for you through them.
_____________________________________________________________________
Safety Warning- We recommend that you wear safety
glasses, gloves and a hard hat while using our tools.
   
 | |
|
