         |
The
Form
Puller Tool
System consists of durable hand tools and the
most effective methods to
use them. While the tools are very effective in helping
to remove the forms, implementation of the "FPT System" is the thing that will
have the biggest impact on your bottom line. Because of
the design and capability of the tools on this
page, you are able to perform your stripping operation in a
different manner, and it's this change in methodology that will
allow you to remove a form in seconds, not
minutes.
Form
Puller IV (U.S. Patent #6,817,590)
(International Patent
Pending)
Form Puller IV
This tool is
designed for removing Arch-Crete architectural forms quickly
and easily without damaging the wall. Form Puller IV
is especially effective in pulling the first
form off the wall, and can then be used
to remove the remaining forms on the wall. Form
Puller IV is part of a four tool system for stripping
Arch-Crete forms. If you own these forms these tools are
a must!
Form Popper
VI (U.S. & International
patents
pending)
Form Popper VI
Form Popper VI is designed for pulling the center ties
out of the wall. It can be used before or after the forms have
been removed, and is most effective when the wall is still
green. If you don't normally remove these ties, now you have
the option to do so. If removing them isn't important to you,
then use it to remove ties that spin in the wall when you try to
snap the end off. Simply slide the head of the tool over the
end of the tie and pull the slide weight toward you, the shock
created by the tool quickly pulls the tie out of the
wall.
Form
Popper VII (U.S. & International patents
pending)
Form Popper VII
Those of you who use the Arch-Crete
architectural forming system know that it is sometimes
difficult to strip the forms because the bottom
1/3 of the form gets hung up on the wall. Well, our
Form Popper VII is the solution to that problem! Simply
attach the tool to the bottom of the form and pull the slide
weight toward you. The bottom of the form is quickly and
easily pulled away from the wall. Form Popper VII is also
helpful in freeing up the bottom of inside corners, and can also be
used for "popping" the top or side of forms away from the wall
when a wall cap has been integrally poured. No
more lengthy stripping times, Form Popper VII gets it done in
seconds!
Form Folder I
(U.S. & International patents
pending)
Form Folder I
Here's the fourth tool in our line for removing
Arch-Crete architectural forms. Form Folder I is designed for
removing those difficult to remove inside corners. This
ratchet strap style tool "folds" the form by pulling the sides
in toward each other. Once the form is folded
sufficiently by using the appropriate number of straps (anywhere
from 1-3 straps, depending on the texture of the form) it easily
comes out of the corner. We've removed a River Rock
pattern inside corner in two
minutes. How long does it take you? You NEED
this
tool!
__________________________________________
Free
Demonstration! Call Wally
Hannawa at Architectural Concrete Creations and he will put you in
contact with a distributor who can provide you with a free, no
obligation demonstration of these tools. He can be
reached at 1-877-753-6767.
_____________________________________________________________________
Safety Warning- We recommend that you wear
safety glasses, gloves and a hard hat while using our
tools.
    
 | |
|
